- Description
- Curriculum
- FAQ
About This Qualification
The QUALIFI Level 6 Diploma in Risk Assessment & Safety Engineering (delivered as the Britsafe International Diploma in Risk Management and Safety Engineering, endorsed by Qualifi 106/5910/6) is an advanced, engineering-focused safety qualification for practitioners and technical leaders managing risk in high-hazard industries. It combines occupational safety and health management with applied engineering principles, aligned with ISO 45001, ISO 31000, IEC 61508, and OSHA 1910/1926.
BCSP TSP Pathway — Bypass the ASP Exam
This qualification is officially approved under the Board of Certified Safety Professionals’ (BCSP) Qualified Equivalent Program (QEP). Graduates are eligible to apply for the Transitional Safety Practitioner (TSP) designation, allowing them to bypass the Associate Safety Professional (ASP) exam and proceed directly to the Certified Safety Professional (CSP) certification.
Qualification Level & Recognition
- Endorsed by Qualifi, a UK awarding body regulated by Ofqual
- Benchmarked at RQF Level 6
- Internationally recognised and aligned with academic and industry standards
Course Duration
- Guided Learning Hours (GLH): 370 hours
- Self-Study Hours: 50 hours
- Total Qualification Time (TQT): 420 hours
Course Outline
The qualification is structured into two mandatory units, each assessed through a written examination followed by a structured professional interview (viva):
Unit 1: Fundamentals of Safety and Risk Management in Occupational Safety and Health
- The Critical Role of Health and Safety in Engineering
- Introduction to Occupational Health and Safety Management System
- Establishing and Implementing OHS Management System for Ongoing Improvement
- Efficiency and Effectiveness of Inspection and Audit Processes in OHS Management Systems
- Management Review Process for Occupational Health and Safety Management Systems
Unit 2: Applications of Safety Engineering in Occupational Safety and Health
- Foundational Physics and Mathematics in Safety Engineering
- General Concepts of Chemistry in Safety Engineering
- Mechanical Equipment Inspection Techniques and Their Practical Applications
- Mechanical and Powered Equipment Safety in the Workplace
- Tools, Equipment, and Structural Designs
- Electricity and Its Hazards in Safety Engineering
- Fire Prevention and Protection
- Nuclear and Radiation Hazards
- Biological Health Hazards in the Workplace
- Engineering Controls for Mitigating Various Workplace Hazards
- Role of Information Technology in Enhancing Occupational Health and Safety in the Workplace
Risk Assessment Methodologies Covered
Learners gain hands-on skills in globally recognised risk assessment techniques including:
- HAZOP (Hazard and Operability Study)
- LOPA (Layer of Protection Analysis)
- FMEA (Failure Modes and Effects Analysis)
- Bowtie Analysis
Eligibility Criteria
Open to candidates with an intermediate or graduation qualification and experience in any professional field.
Who Is This Qualification For?
Designed for safety engineers, risk managers, and technical professionals aiming for senior-level HSE management, process safety engineering, or safety consultancy roles — particularly in construction and infrastructure, oil & gas, chemical processing, manufacturing, energy and utilities, and marine, aerospace, and defense systems.
Class Format
No physical classes are required — the entire course is delivered through our online LMS, allowing you to study at your own pace from anywhere.
Assessment Scheme
- Exam Type: Scenario-based written examination for each unit
- Number of Exams: 2 (Unit 1 + Unit 2)
- Exam Duration: 24 hours for each exam
- Exam Booking: Available every month
- Final Stage: Structured professional interview (viva) upon completion of both units
Registration Process
Register online here. Required documents: National Identity Card or Passport, email address, passport-sized picture, last degree/DMC, and all HSE certifications.
Course Fee & Duration
- Fee: PKR 150,000
- Duration: 30–40 Days
- Certificate Availability: Soft copy
Why Choose ISC for This Diploma?
- Engineering-centered curriculum covering physical, chemical, biological, electrical, and mechanical hazards
- Direct pathway to BCSP’s CSP certification via the TSP route — skip the ASP exam
- Expert HSE instructors with industry experience
Unit 1 - Theory
Unit 2 - Theory
What is the QUALIFI Level 6 Diploma in Risk Assessment & Safety Engineering course fee?
At Inspire Safety College (ISC), the QUALIFI Level 6 Diploma in Risk Assessment & Safety Engineering fee is Rs150,000, covering study materials, assignments and tutor support throughout the diploma.
Who awards the QUALIFI Level 6 qualification, and is it recognized in Pakistan?
QUALIFI is a UK-based, Ofqual-regulated awarding organisation. Its Level 6 diplomas are recognized by employers and further-education providers internationally, including in Pakistan and the Gulf region, as postgraduate-equivalent qualifications.
Is the QUALIFI Level 6 Diploma available online, or only in Faisalabad?
This diploma is delivered primarily online with tutor support, so risk and safety engineering professionals across Pakistan can study without needing to relocate to Faisalabad.
Who should enrol in the QUALIFI Level 6 Diploma in Risk Assessment & Safety Engineering?
This diploma suits safety professionals and engineers who want structured, in-depth knowledge of risk assessment methodologies and safety engineering principles, typically after some workplace safety experience.
What assessment method does the QUALIFI Level 6 Diploma use?
The diploma is assessed through written assignments covering each module, allowing candidates to demonstrate applied understanding of risk assessment and safety engineering concepts at their own pace.
How do I enrol in the QUALIFI Level 6 Diploma at ISC?
You can enrol through ISC's online registration page or by contacting ISC directly; since the course is delivered online, you can start from anywhere in Pakistan.
Is QUALIFI Level 6 regulated by Ofqual, and what does that mean for international recognition?
Yes. QUALIFI is a UK Ofqual-regulated awarding organisation, and the Level 6 Diploma in Risk Assessment & Safety Engineering sits on the UK's Regulated Qualifications Framework (RQF) at degree (Bachelor's/Honours) level. Because it is a nationally regulated UK qualification, it carries strong international recognition and credibility with employers, universities, and professional bodies across Pakistan, the Gulf, and beyond.
How does this diploma help me qualify for BCSP's Transitional Safety Practitioner (TSP) designation?
The Board of Certified Safety Professionals (BCSP) recognizes the QUALIFI Level 6 Diploma in Risk Assessment & Safety Engineering (IDRMSE) as an approved qualification under its Qualified Equivalent Program (QEP). Holding this diploma, together with the required work experience, lets you apply directly for the TSP designation instead of sitting the ASP exam, putting you on a faster route toward the CSP credential.
If I get TSP through this diploma, how long do I have to sit the CSP exam?
Once BCSP approves your Transitional Safety Practitioner (TSP) application, you have a limited window—currently up to 6 years—to sit and pass the CSP exam. If the CSP exam is not passed within that period, the TSP designation lapses and you would need to requalify through the standard ASP route.
Does completing this diploma let me skip the BCSP Associate Safety Professional (ASP) exam?
Yes. This is the main advantage of the TSP pathway. Because IDRMSE is a BCSP-approved QEP qualification, professionals who hold it can bypass the ASP written exam entirely and move straight to preparing for the CSP exam, saving significant time and exam fees compared to the traditional ASP-first route.
What are the Guided Learning Hours (GLH) and Total Qualification Time (TQT), and how long does the course take?
The QUALIFI Level 6 Diploma carries 370 Guided Learning Hours (GLH), 50 hours of directed self-study, and a Total Qualification Time (TQT) of 420 hours. At ISC, the course is typically completed in 30 to 40 days through self-paced online learning, so working professionals can finish it alongside their jobs.
What are the entry and eligibility requirements to register for this diploma?
Applicants normally need an intermediate-level or graduation-level academic qualification along with some work experience in any field. You do not need a safety-specific degree to enrol—ISC assesses each applicant's background individually and provides guidance if you are unsure whether you meet the criteria.
Is prior HSE work experience mandatory to enrol?
No, dedicated HSE experience is not a strict requirement. The diploma is designed to be accessible to graduates and professionals from engineering, technical, or general work backgrounds who want to move into safety engineering and risk management roles, not only those already working in dedicated HSE positions.
How long is the final exam, and what does the viva voce involve?
Each of the two units is assessed through a 24-hour scenario-based written exam plus a structured viva voce (oral examination). The written exam tests your ability to apply risk assessment tools to realistic workplace scenarios, while the viva lets the assessor verify your understanding and the reasoning behind your written answers.
Which risk assessment methodologies are covered in this course?
The course covers all major industry risk assessment techniques, including HAZOP (Hazard and Operability Study), LOPA (Layer of Protection Analysis), FMEA (Failure Mode and Effects Analysis), and Bowtie analysis. These are the same methodologies used in oil & gas, chemical, and process safety environments across Pakistan and the Gulf.
What topics are covered in Unit 1 and Unit 2 of the diploma?
Unit 1, "Fundamentals of Safety and Risk Management in OSH," covers core risk management theory and occupational safety principles. Unit 2, "Applications of Safety Engineering in OSH," focuses on applying safety engineering techniques and risk methodologies to real industrial scenarios.
What career opportunities can I pursue after completing this diploma?
Graduates typically move into roles such as safety engineer, risk manager, HSE technical advisor, or process safety specialist within construction, oil & gas, chemical, manufacturing, energy, and marine, aerospace, and defense industries across Pakistan and the Gulf.
How does this diploma compare with the NEBOSH International Diploma?
Both are internationally recognized safety qualifications, but the QUALIFI Level 6 Diploma focuses specifically on risk assessment and safety engineering methodologies such as HAZOP, LOPA, FMEA, and Bowtie, and is directly approved by BCSP for the TSP pathway toward CSP. The NEBOSH International Diploma, by contrast, covers broader occupational health and safety management. Many professionals choose IDRMSE specifically for its recognized route into BCSP's CSP/ASP certification framework.
How does this diploma compare with ISC's OTHM Level 6 and NVQ Level 6 diplomas?
All three are UK-regulated Level 6 (degree-equivalent) qualifications, but they serve different purposes. OTHM Level 6 and NVQ Level 6 focus on broader occupational health and safety management, while the QUALIFI Level 6 IDRMSE specializes in risk assessment and safety engineering and is the specific qualification recognized by BCSP for the TSP pathway toward CSP.
Is this diploma recognized by employers in the Gulf countries?
Yes. As a UK Ofqual-regulated qualification, the QUALIFI Level 6 Diploma is widely recognized by employers, contractors, and HSE departments across the UAE, Saudi Arabia, Qatar, and Oman, particularly in construction, oil & gas, and process industries where formal risk assessment qualifications are highly valued.
SAQIB
